VTech IP8100 quick start Getting Started, Installation of Batteries in Handset

Page 3

IP8100 series Quick Start Guide

Getting Started

Installation of Batteries in Handset

Follow the steps below:

1.Place the new battery in the handset and align the two holes in the plug with the socket pins to snap the plug into place.

2.Replace the battery cover by sliding it upwards.

3.If the new batteries are not already charged,

place the handset in its charger, and allow it to charge for 10-12 hours. After initial charge, a maintenance charge of 8 hours should be sufficient.

NOTE: Use VTech battery 80-5808-00-00 or VTech Replacement 89-1324-00-00. To purchase replacement batteries,

visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 800-595-9511.

Charging of the Handset Batteries

The handset of your cordless telephone is powered by rechargeable batteries. It charges automatically whenever handset is in its charger.

You should charge the batteries for 10-12 hours when you first receive your phone. You will know the batteries need charging when:

The low battery message is displayed.

The handset seems completely dead, the LCD is completely clear and does not activate when you press the keys.

• IMPORTANT •

BEFORE YOU BEGIN: Make sure that you have installed and fully charged the handset batteries.

2

Image 3
Contents IP8100 series Quick Start Guide Parts Check List BatteryiesGetting Started Installation of Batteries in HandsetIP8100 series Quick Start Guide Internet Installation Without a RouterCable Users DSL Users Installation Without a Router cont’Installation With a Router Installation With a Router Installation With a Modem Router Installation With a Modem Router Issue