Getting started
Battery installation
Install the battery as shown below.
1.Plug the battery connector securely into the socket inside the handset battery compartment, matching the
2.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.
3.Align the cover flat against the battery compartment, then slide it towards the center of the handset until it clicks into place.
4.Charge the handset by placing it in the telephone base or charger. The CHARGE light is on when the handset is charging.
1 | 2 |
2
3 | 4 |
Charge light
•If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.
•To purchase a replacement battery, visit our website at www.vtechphones.com or call 1 (800)