Answering System Operation At The Base
System Announces: | Description/Directions |
“Set security code” | Use CHANGE to choose the remote access |
19* | code you will use to access features and |
| functions of the answering system from a touch |
| tone phone. You can select any |
| from 10 to 99. |
“Set audible message alert” | When message alert is turned on, the base |
Off * | beeps once every 10 seconds when new |
On | messages have been received. |
“Set announce only” | When you turn announce only ON, callers hear |
Off* | your announcement, but cannot leave |
On | a message. |
“Set base ringer” | Turn the base ringer on or off. |
On* |
|
Off |
|
“Set number of rings” | Choose how many times the phone will ring |
2 | before the system answers a call. |
4 * |
|
6 |
|
|
|
Toll Saver | With toll saver active, the system answers after |
| two rings when you have new messages and |
| after four when you have no new messages. |
Listen to & Delete Messages |
|
•To advance the remote access code by 10, press and hold SELECT.
•Feature summary options listed with an * are your phones default setting.
Basic Operation
www.vtechphones.com | BASIC OPERATION 25 |