Getting started
Add and register a handset
Each newly purchased handset (LS6305) must be registered to the telephone system (LS6315/LS6325/LS6305) before use. When first purchased, each handset shows 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. You may need to charge the handset before registering it to the telephone base. For more details on battery charging, see page 3.
To make registration easier, read all of the instructions on this page before you begin.
To register a handset:
1.Place the unregistered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.
2.On the telephone base, press and hold
/FIND HANDSET for about four seconds until the red IN USE light on the telephone base turns on.
3.Remove the handset from the telephone base or charger and then press #. It displays Registering...Please wait. It takes about 10 seconds to complete the registration.
The handset shows Handset X Registered and you hear a beep when the registration completes.
When the registration is complete, the newly registered handset is assigned the next available handset registration number. For instance, if you already have HANDSET 1, the next registered handset will be HANDSET 2.
• If the registration fails, the handset displays Registration failed for a few seconds, then 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. To reset the handset, remove it from the telephone base and place it back in. Try the registration process again.
•You cannot register a handset if any other system handset is in use.
•Only one handset can be registered at a time.