Registration

Getting Started

Your mi 6820 is an accessory handsets for use with the mi 6821, mi 6822, mi 6861, mi

6862 or mi 6872 base units. To register your mi 6820 for the first time:

1. After charging the battery, the screen will display:

2.Press SEL, you will see ENTER BASE ID, if the screen already says ENTER BASE ID, go to step 3.

3.Enter the 15 digit base unit ID code, located on the

underside of your main base (mi 6821, mi 6822, mi 6861, mi 6862 or mi 6872). If you make a

mistake, press the DELETE key to backspace

(delete characters),	then enter the correct
information.

4.Press SEL to complete the registration process.

5.Once a valid base ID code has been entered, the

display will blank for a second or two, and then show:

6.If the base accepts the new handset, after several seconds the new handset will show:

where X is the new handset number assigned, sequentially, by the base.

If you do not enter the correct digit sequence, you will hear an error tone. Press DELETE key to backspace to erase a character(s) and carefully re-enter the base ID code.

NOTE: The 15-digit BASE ID Code may contain numbers and characters, including 0 through 9 and *. Make sure you enter all 15 digits.

Re-register Existing Handsets to New Base

1.Install the new mi 6821, mi 6822, mi 6861, mi 6862 or mi 6872 base unit. The handsets will display SEARCHING…, press and hold the SEL button for two seconds.

2.The handset will display:

3.Follow steps 3 through 6 in Registration, above.