Motorola T6220, T6210 manual Talking and Listening, Before You Can Talk, Setting the Channel

Page 30

Talking and Listening

28

Talking and Listening

Before You Can Talk

To talk with someone on your two-way radio, both of you must be on the same channel, interference eliminator code, and Eavesdrop Reducer code (T6210 and T6220 only).

The channel is the radio frequency wave your radio uses to transmit. The interference eliminator code filters out static, noise, and unwanted messages. Refer to the Frequency and Code Charts beginning on page 48 for channel and code choices. The Eavesdrop Reducer code makes your transmissions sound garbled to anyone listening who is not set to that code. See page 38.

Setting the Channel

To set the channel, press \ once. The channel number begins to blink. Then press [ or ] to set the channel. Then proceed to the next menu or wait 10 seconds to save the channel setting. To quickly exit the menu and go back to the first display screen, press M.

The red indicator light above the P button flashes quickly whenever the channel is in use. Keep scrolling until you find a clear channel.

Image 30

Contents Models T6200, T6210, and T6220 Page Introduction Canada TTY Text TelephoneContents Troubleshooting Other Important FeaturesFrequency and Code Charts Motorola Limited WarrantySafety and General Information RF Operational CharacteristicsExposure to Radio Frequency Energy Portable Radio Operation and EME Exposure Antenna CareTwo-Way Radio Operation Body-Worn OperationMedical Devices FacilitiesAircraft PacemakersSafety and General Use While Driving Hearing AidsOther Medical Devices Potentially Explosive Atmospheres Operational WarningsFor Vehicles with an Air Bag Blasting Caps and AreasAntennas Charging Safety InstructionsOperational Cautions BatteriesSingle-Unit Charger BatteriesCanada Getting Started Basic Operation of Your RadioNiMH Battery Charging Contacts Belt ClipInstalling Batteries Getting Started Battery Meter Battery LifeCharging the NiMH Battery Charging Status Charging Dock Charging Dock Charger Light Indicator Press and Hold Normal Menu Mode Turning On Your RadioTurning Off Your Radio Your Radio’s DisplayChanging Settings While Turning On Your Radio Keys Pressed and Held Function While Turning On Your RadioAccessing and Setting Features Setting the Battery TypeBacklight Setting the Channel Talking and ListeningBefore You Can Talk Setting the Interference Eliminator Code VolumeOptimal Range To TalkTalking Range Medium Range Minimal RangeMonitor/Signal Strength Indicator Using AccessoriesAlerts Call Tone and Call DisplayRing Only T6200 Only Display Within Setting Menu Function Ring and/or VibraCall T6210 and T6220 OnlyTalk Confirmation Tone Button BeepsHands-Free Use With Accessories Hands-Free Use VOXSetting Sensitivity Level Privacy Eavesdrop Reducer T6210 and T6220 OnlySetting Display Function QuieT6000Unique Situations Weather T6220 Only Turning On Weather Channel ReceptionSetting the Weather Channel Setting the Weather Alert Other Important Features LockScanning Auto Power Off Reset Simple MenuUse and Care If the radio gets wetFrequency and Code Charts ChannelInterference Eliminator Codes Troubleshooting Interference ReceivedHeavy static or Channel and/orCannot access Motorola Limited Warranty What This Warranty CoversII. What the Period of Coverage Is IV. What We Will Do to Correct Warranty Problems How to Get Warranty ServiceIII. Who is Covered VI. What This Warranty Does Not Cover Motorola Limited Warranty VII. Some Other Limitations VIII.Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Computer Software Copyrights FCC License Not Required Page Page Page Page No license fee or airtime charges Weather-resistant Hands VibraCallDetailed steps contained in the User’s Guide Call ToneThrough 10 T6220 Only T6210 & T6220Through 5 T6200 & T6210 T6200 Only