Motorola and T6220, T6200 Received, Heavy static or, Interference, Channel and/or, Code locked

Page 53

Symptom	Try This:
Message not	Confirm radios have the same channel and interference eliminator
received	code settings.
	Make sure M is NOT being pressed while trying to listen.
	Reposition, replace, or recharge batteries.
	If QuieT6000 feature is on, transmit call tone before talking.
	If QuieT6000 feature is on, with only VibraCall selected, a
	received call must be acknowleged by pressing any button (or a
	VOX activation) before the radio can receive any incoming
	transmissions.
	Obstructions and operating indoors, or in vehicles, may interfere --
	change location.
	Verify that the radio is not in Scan mode.
	Eavesdrop Reducer code is on, or setting does not match other
	radios; all radios must use the same Eavesdrop Reducer code.
Heavy static or	Radios are too close, they must be at least five feet apart.
interference	Radios are too far apart or obstacles interfering with transmission.

	Talk range is up to two miles in clear, unobstructed conditions.

Channel and/or	Make sure menu is unlocked. Unlock by pressing \for three
code locked	seconds.
	seconds.

Troubleshooting

51

Image 53

Contents Models T6200, T6210, and T6220 Page Introduction TTY Text Telephone CanadaContents Frequency and Code Charts Other Important FeaturesTroubleshooting Motorola Limited WarrantyExposure to Radio Frequency Energy Safety and General InformationRF Operational Characteristics Antenna Care Portable Radio Operation and EME ExposureBody-Worn Operation Two-Way Radio OperationAircraft FacilitiesMedical Devices PacemakersOther Medical Devices Safety and General Use While DrivingHearing Aids For Vehicles with an Air Bag Operational WarningsPotentially Explosive Atmospheres Blasting Caps and AreasOperational Cautions Charging Safety InstructionsAntennas BatteriesBatteries Single-Unit ChargerCanada Basic Operation of Your Radio Getting StartedBelt Clip NiMH Battery Charging ContactsInstalling Batteries Getting Started Battery Life Battery MeterCharging the NiMH Battery Charging Status Charging Dock Charging Dock Charger Light Indicator Turning On Your Radio Press and Hold Normal Menu ModeYour Radio’s Display Turning Off Your RadioKeys Pressed and Held Function While Turning On Your Radio Changing Settings While Turning On Your RadioSetting the Battery Type Accessing and Setting FeaturesBacklight Before You Can Talk Setting the ChannelTalking and Listening Volume Setting the Interference Eliminator CodeTalking Range To TalkOptimal Range Medium Range Minimal RangeUsing Accessories Monitor/Signal Strength IndicatorCall Tone and Call Display AlertsRing Only T6200 Only Ring and/or VibraCall T6210 and T6220 Only Display Within Setting Menu FunctionButton Beeps Talk Confirmation ToneHands-Free Use VOX Hands-Free Use With AccessoriesSetting Sensitivity Level Eavesdrop Reducer T6210 and T6220 Only PrivacyQuieT6000 Setting Display FunctionUnique Situations Turning On Weather Channel Reception Weather T6220 OnlySetting the Weather Channel Setting the Weather Alert Scanning Other Important FeaturesLock Auto Power Off Simple Menu ResetIf the radio gets wet Use and CareChannel Frequency and Code ChartsInterference Eliminator Codes Troubleshooting Heavy static or ReceivedInterference Channel and/orCannot access II. What the Period of Coverage Is Motorola Limited WarrantyWhat This Warranty Covers III. Who is Covered IV. What We Will Do to Correct Warranty ProblemsHow to Get Warranty Service VI. What This Warranty Does Not Cover Motorola Limited Warranty VII. Some Other Limitations VIII.Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Computer Software Copyrights FCC License Not Required Page Page Page Page No license fee or airtime charges Weather-resistant Detailed steps contained in the User’s Guide VibraCallHands Call ToneThrough 5 T6200 & T6210 T6210 & T6220Through 10 T6220 Only T6200 Only