Motorola T5700 Getting Started, Installing the AA Batteries, Installing the NiCd Battery Pack

Page 16

Getting Started

14

Getting Started

Installing the AA Batteries

Your radio uses 3 AA Alkaline batteries.

1.With the back of the radio facing you, lift the battery latch up to release the battery cover and remove the cover.

2. Insert 3 AA Alkaline batteries as shown on the inside of the battery compartment.

3. Reposition the battery cover and press down to secure.

Note: The T5600, T5620, T5700, T5710, and T5720 model radios can use a NiCd rechargeable battery instead

of 3 AA Alkaline batteries. A rechargeable battery upgrade kit, model number 53614, is available for these radios. For the dealer nearest you, call 1-800-353-2729 in the USA, or visit our website at www.motorola.com/talkabout.

Installing the NiCd Battery Pack

1.Follow step 1 above to remove the battery cover.

2.Remove the battery pack from the clear plastic bag.

Do not disassemble or unwrap the battery pack.

3.Insert the NiCd battery pack so the metal contacts on the side of the battery are facing outward from the radio to connect with the contacts on the battery door.

4.Reposition the battery cover and press down to secure.

Image 16

Contents @6881042B60@ Page Introduction Congratulations on your purchase of a Motorola productContents Transmit and Receive Procedure Safety and General InformationExposure to Radio Frequency Energy Portable Radio Operation and EME Exposure Antenna CareApproved Accessories Two-Way Radio OperationBody-Worn Operation Data OperationAircraft FacilitiesMedical Devices Pacemakers Safety and General Use While Driving Medical Devices Hearing AidsOther Medical Devices Operational WarningsPotentially Explosive Atmospheres Blasting Caps and AreasOperational Cautions AntennasBattery Charger Safety Instructions BatteriesSafety and General Information FCC Licensing Information Faxed Mailed QuestionsControl Buttons Models T5600, T5700 Control Buttons Models T5620, T5710, T5720 Accessory Jack Use J toRemovable Front Cover Speaker Use \ to Installing the AA Batteries Installing the NiCd Battery PackDo not disassemble or unwrap the battery pack Getting StartedBattery Meter Using the Desk Stand Charger Optional AccessoryGetting Started Setting the Volume Attaching the Belt ClipRemoving the Belt Clip Turning Your Radio On and OffSetting a Channel Channels and Frequencies Frequency Description ChannelTalk Range Talking and ListeningChecking the Channel Before Transmitting Push to Talk Timeout Timer Special FeaturesInterference Eliminator Code Locking the Keypad Scanning Channels Models T5620, T5700, T5710 OnlyRemoving Channels from the Scan List Nuisance Delete Feature Scan AdvanceSetting and Transmitting Call Tones Channel Busy IndicatorAlerts Transmitting a Talk Confirmation Tone QT Noise Filtering Models T5700, T5710, T5720 OnlyAlerts Using Audio Accessories AccessoriesVoice Activation VOX Accessories Models T5710, T5720 Only Setting the Sensitivity Level Models T5710, T5720 Only = High Sensitivity = Medium Sensitivity = Low SensitivityPatent Information Page FCC Gmrs License Required