Talking and Listening
Remember that FRS radios operate at 0.5 watts of transmit power. On
Channel
1.With radio On, press \ , Current Channel will begin to flash.
2.Use [ and ] to change Channel while flashing.
3.Press M to set new Channel.
Interference Eliminator Code |
|
The interference eliminator codes help minimize interference by | 22 |
providing you with a choice of code combinations. |
•To set the code, press \ until the code display begins to blink.
• Then press [ or ] to set the code.
•Press M to save the code setting.
You can specify a different code for each channel. To set a channel and code combination, press \ and then press [ or ] to select the channel. Press \ again and then press [ or ] to select a code. Press M to exit the menu and to save the
16