Alerts
Transmitting a Talk Confirmation Tone
You can set your radio to transmit an unique tone when you finish transmitting. It's like saying Roger or Over to let others know you are finished talking.
•To turn talk confirmation on, press and hold 
while you turn the radio on. When you release 
after transmitting, your call tone transmits and 
displays.
•To turn talk confirmation off, turn your radio off and then back on while pressing and holding 
.
To transmit to a radio that has QT noise filtering turned on:
1.Select the same channel and Interference Eliminator Code as the other radio.
2.Press 
to send a call tone. This allows your voice to pass through the QT noise filter on the receiving radio.
3.Press 
and speak normally.
Note: If you skip step 2, the beginning of your message may not be heard on the receiving radio.
For a
22