Motorola RDU2020, RDV5100, RDV2020, RDU4100 manual Editing Scan List, Nuisance Channel Delete

Editing Scan List

Scan Lists can be edited by using the CPS (refer to CPS section on page 48)

Nuisance Channel Delete

Nuisance Channel Delete allows you to temporarily remove channels from the Scan List. This feature is useful when irrelevant conversations on a ‘nuisance’ channel tie up the radio's scanning feature.

To delete a channel from the Scan List:

•Start Scan by short pressing the SB2 button (*)

•Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to delete it.

•The channel will not be removed until you exit Scan by short pressing the SB2 button again or by turning the radio OFF.

Note: (*) Assumes the SB2 button is not programmed to another function different from the default.

PROGRAMMING FEATURES