VTech VT 1311 manual Troubleshooting, Specifications, Appendix, Warranty

Beep

You can mute the beep sound by the following procedures.

1.Turn the radio off.

2.Turn the radio on while pressing both the UP and DOWN buttons. “oF” will appear for indication.

To activate the beep again, repeat the procedures described above and “bP”(Beep) will appear for indication.

Key Lock

The key lock feature prevents accidental channel changes and accidental function activation. Only the PTT and the POWER buttons will be available.

1.Turn the radio off.

2.Turn the radio on while pressing both the MODE and DOWN buttons. “Lc”(Lock) will appear for indication.

3.Repeat 1 and 2 to exit the key lock mode.

System Reset

The factory default settings are Channel 1/CTCSS disabled/Volume 8. You can reset the radio to the initial state by the following procedures.

TROUBLESHOOTING

Symptom	Solutions
Display is dark	Reposition or replace
	batteries
No transmitter	1.	Be sure the PTT button is
output		pressed completely when
		transmitting.
	2.	Reposition or replace
		batteries.
The loudspeaker is	1.	Check the volume level.
muted when the	2. Check your CTCSS code or
green LED is		disable the CTCSS feature.
illuminated	3.	Reposition or replace
		batteries.
MODE/UP/DOWN	1.	Turn the radio off.
buttons do not	2.	Turn the radio on by
function		pressing the MODE and
		DOWN buttons.
No beep	1.	Turn the radio off.
	2.	Turn the radio on by
		pressing the UP and DOWN
		buttons simultaneously with
		the POWER button to

167.0

271.9

374.4

477.0

579.7

682.5

785.4

888.5

991.5

1094.8

1197.4

12100.0

13103.5

14107.2

15110.9

16114.8

17118.8

18123.0

19127.3

20131.8

21136.5

22141.3

23146.2

24151.4

25156.7

26162.2

27167.9

28173.8

29179.9

30186.2

31192.8

32203.5

33210.7

34218.1

35225.7

36233.6

37241.8

38250.3

11035 SW 11th Street

BEAVERTON, OREGON 97005

VTech Communications assumes no responsibility for units sent without prior Return Authorization.

WHAT DOES OUR WARRANTY NOT COVER?

yBatteries

yDamage from misuse, neglect, or acts of nature (lightning, floods, power surges, etc.)

yProducts which may have been modified or incorporated into other products.

yProducts purchase and/or operated outside the USA, its territories, or Canada.

yProducts serviced by the owner or a service facility not expressly authorized by VTech Communications.

yProducts purchased more than 12 months from current date

yUnits purchased in "AS IS" condition or units purchased as "Distressed Merchandise".

HOW DOES STATES LAW RELATES TO THIS WARRANTY?

y This warranty gives you specific rights. You

may also have other rights that vary from state

to state.

1.Turn the radio off.

2.Turn the radio on while pressing the MODE, UP,DOWN and the PTT buttons to return to the factory default settings.

Automatic Power Off

This feature turns the power off automatically if you forget to turn your radio off. If, after 30 minutes of receive inactivity and no button has been pressed, the radio will turn the power off automatically. The initial setting is OFF.

1.Turn the radio off.

2.Turn the radio on while pressing both the MODE and UP buttons. “AP”(APO) will appear for indication.

3.Repeat 1 and 2 to exit the Automatic Power Off mode and “oF” will appear for indication.

External Speaker and

Microphone Jacks

Connect an optional speaker-microphone or headset if needed. When an external speaker-microphone or headset is connected the internal microphone and speaker will be deactivated.

Note: Some types of speaker microphone units have a common ground connection, and the use of this type of unit may cause damage to your VTech transceiver.

	activate the beep.
Radio will not work	Confirm that the ground
with an external	connections between the
speaker-	speaker and microphone are
microphone	separate.

SPECIFICATIONS

Frequency Range	462.550~467.725MHz
Channels	14
CTCSS Code	1-38 (Encode/Decode/Scan)
Communication	up to 2.5Km
Range
Power Source	3 AAA Batteries

APPENDIX

Channel Frequency Table

Channel	MHz	Channel	MHz
1	462.5625	8	467.5625
2	462.5875	9	467.5875
3	462.6125	10	467.6125
4	462.6375	11	467.6375
5	462.6625	12	467.6625
6	462.6875	13	467.6875
7	462.7125	14	467.7125

CTCSS Code Frequency Table

Code Frequency(Hz) Code Frequency(Hz) Code Frequency(Hz)

WARRANTY

WHAT DOES OUR WARRANTY COVER?

yAny defect in material or workmanship.

FOR HOW LONG AFTER THE ORIGINAL PURCHASE?

yTo the original purchaser only - ONE YEAR.

WHAT WILL VTECH DO?

yCall VTech Communications customer service for Return Authorization at::

1-800-595-9511

yProperly pack your unit. Include any cables & accessories, which were originally provided with the product. We recommend using the original carton and packing materials.

yInclude in the package a copy of the sales receipt of other evidence of date of original purchase (if the unit was purchased within the last twelve months).

yPrint your name and address, along with a description of the defect, and include this in the package.

yInclude payment for any service or repair not covered by warranty, as determined by VTech Communications.

yShip the unit via UPS insured, or equivalent to:

VTECH COMMUNICATIONS