Listening to Weather Broadcast

Maintaining Clock Time Automatically Using RBDS CT

To automatically maintain the correct time on your Motorola MWR839 Weather Alert Radio without manual operation:

1.Press the MENU button.

2.Press TUNE DOWN to scroll down to the Clock menu.

3.Press TUNE DOWN to scroll down to Automatic.

4.Press the VOL UP button to turn the Automatic function ON.

5.Press SELECT.

6.Press TUNE DOWN to scroll and SELECT to choose Station 1, Station 2 or Station 3.

7.Press any PRESET station or use TUNE UP/DOWN to set the radio to a FM station as the source of the radio CT data.

8.Press ON/OFF to put the radio in standby mode.

The radio will synchronize the clock time according to your settings of these three stations every two hours. The icon will appear on the LCD display when the radio clock is synchronized with CT.

Note:

The CT function can only be operated manually, when the Automatic feature is turned off.

1.Press the MENU button and press the TUNE DOWN to scroll down to Weather Channel, and press the SELECT button to enter the menu. The LCD display will show the channel number. Press TUNE UP/DOWN to select the channel that corresponds with the NOAA website listing. Press the SELECT button to save the

Channel Setting and return to the main menu list.

2.Switch the Weather Alert ON/OFF to put the weather receiver into alert mode. Press the WEATHER BAND button to hear the voice broadcast.

Place the radio where it gets the best reception. Adjust the orientation and length of the antenna for the best reception. The LCD display willshow the specified weather channel number in the upper right handcorner when the weather / hazard receiver is in alert mode.

To turn off the weather channel press the WEATHER BAND button again.Your radio can be further programmed to respond to alerts in specific areas. To custom program your radio for alerts in your area only, see the SAME programming instructions on page 11-12.

Model: MWR839