Akyd Command Assignment of Dterm Function Key

Voicemail Disconnect Installation & Operation Manual

INSTALLATION & SET-UP

Mat Assignments (cont)

AOKC Command: (Assignment of OAI Key Codes)

This command is used to associate the MSF facility and its Op-Code that was configured in the APM for the application to one of the OAI Key Codes in the MAT.

Step 1: Select an unused OAI Key Code, from 1 to 14. To determine what Key Codes are available for assignment, use the LOKC command to list the AOKC Key Codes that are already assigned.

Step 2: Enter the type of facility using the value that designates the MSF.

Step 3: Enter the same MSF Op-Code that was configured for Voicemail Disconnect in the APM. Retrieve it using the Providers command on the APM Applications Configuration Entry screen.

AKYD Command: (Assignment of Dterm Function Key)

MAT Function Key Indexes #34 to #47 have been designated for use in the OAI system and correspond to the 14 OAI Key Codes as illustrated in Figure 1-1 on page 6. The AKYD command is used to assign a Dterm function key to the specific MAT Function Key Index that, in turn, corresponds to the previously assigned OAI Key Code. This command must be used to assign the function key on each Dterm that is to be set up with access to Voicemail Disconnect.

Step 1: Determine the specific Dterm function key designated in the application configuration as the key that is to be pressed to activate Voicemail Disconnect from the Dterm.

Step 2: Enter the same tenant number that is configured for the application in the APM Application Configuration option (default is 1).

Step 3: Enter the station number of the Dterm on which the function key is being assigned.

Step 4: Enter the Dterm function key to the MAT Function Key Index that in turn corresponds to the previously assigned OAI Key Code.

Step 5: Assign the virtual line, such as the subline.

NDA-30130 Revision 1

Page 7