Electro-Voice ENG 618 specification

ENG 618 Integrated Shotgun/Boom-Pole Microphone

The headphone jack could also be used to connect to a portable tape recorder for quick minimal equipment coverage.

Each segment of the telescoping boom pole can be secured with a twist of the collet at any position along its length. By loosening, the segments can collapse quickly into each other. Folding the microphone toward the handle allows the unit to locate into the base for storage.

Architectural and Engineering

Specifications

The microphone shall be a back-electret con- denser with a hypercardioid-line polar pattern.The microphone shall be used in the manner of a handheld microphone. The microphone shall have a frequency re- sponse from 50 Hz to 8 kHz with a swit- chable 200 Hz roll-off. The product shall have a balanced output with a 100-ohm nominal impedance. The open-circuit output voltage shall be 19 mV/pascal. The micro- phone capsule shall be made of brass; the electronics housing shall include a bass roll- off filter circuit, an adjustable output 9-volt battery-powered headphone amplifier and a low-battery LED indicator.

The microphone shall be permanently con- nected to its extension boom pole and elec- tronics module via an internal coiled, shielded miniature audio cable. The boom pole shall be capable of being extended and made se- cure at any position along its length.The fin- ish on all exposed surfaces shall be a non- reflecting black. The microphone shall be supplied with windscreen and storage pouch. The ENG 618 is specified.

Limited Warranty

Electro-Voice products are guaranteed against malfunction due to defects in mate- rials or workmanship for a specified period, as noted in the individual product-line statement(s) below, or in the individual prod- uct data sheet or owner’s manual, beginning with the date of original purchase. If such malfunction occurs during the specified pe- riod, the product will be repaired or replaced (at our option) without charge. The product will be returned to the customer prepaid. Ex- clusions and Limitations: The Limited Warranty does not apply to: (a) exterior fin- ish or appearance; (b) certain specific items described in the individual product-line statement(s) below, or in the individual prod- uct data sheet or owner’s manual; (c) mal- function resulting from use or operation of the product other than as specified in the prod- uct data sheet or owner’s manual; (d) mal- function resulting from misuse or abuse of the product; or (e) malfunction occurring at any time after repairs have been made to the product by anyone other than Electro-Voice Service or any of its authorized service rep- resentatives. Obtaining Warranty Service: To obtain warranty service, a customer must deliver the product, prepaid, to Electro-Voice Service or any of its authorized service rep- resentatives together with proof of purchase of the product in the form of a bill of sale or receipted invoice. A list of authorized ser- vice representatives is available from Electro- Voice Service at 600 Cecil Street, Buchanan, MI 49107 (800/234-6831 or FAX 616/695-4743). Incidental and Conse-

quential Damages Excluded: Product re-

pair or replacement and return to the customer

are the only remedies provided to the cus- tomer. Electro-Voice shall not be liable for any incidental or consequential damages in- cluding, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of inciden- tal or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you spe- cific legal rights, and you may also have other rights which vary from state to state.

Electro-Voice Wired Microphones are guaranteed against malfunction from any cause for two (2) years from the date of origi- nal purchase. In addition, the Limited War- ranty for the acoustic system contained in these microphones shall apply for the life of the product, defined as a period of ten (10) years from the date that the manufacture of the specific microphone has been discontin- ued. Any and all active electronics incorpo- rated in these microphones are guaranteed against malfunction due to defects in mate- rials or workmanship for a period of three

(3)years from the date of original purchase. The Limited Warranty does not extend to cables, cable connectors, or switches. Addi- tional details are included in the Uniform Limited Warranty statement.

For warranty repair or service informa- tion, contact the service repair department at: 616/695-6831 or 800/685-2606.

For technical assistance, contact Technical Support at 800/234-6831 or 616/695-6831,M-F, 8:00 a.m. to 5:00 p.m. Eastern Stan- dard Time.

Specifications subject to change without no- tice.

ENG 618 specifications

The Electro-Voice ENG 618 is a cutting-edge microphone designed specifically for field production and broadcast applications. Renowned for its reliability and high-quality audio capture, the ENG 618 is ideal for on-location interviews, live reporting, and high-pressure environments where sound clarity and performance are paramount.

One of the standout features of the ENG 618 is its hypercardioid polar pattern. This design effectively isolates the desired sound source while minimizing background noise, making it perfect for capturing speech in bustling environments. Its targeted pickup pattern ensures that the microphone focuses on the speaker, which is crucial in noisy settings like public events or crowded locations.

Equipped with a frequency response of 40 Hz to 20 kHz, the ENG 618 delivers a rich and balanced audio reproduction. This wide frequency range ensures that it captures both the lows and highs of the human voice, maintaining clarity and definition, even in challenging acoustic environments. Its high sensitivity allows for excellent performance with minimal amplification, reducing the chances of distortion.

The ENG 618 also incorporates advanced handling noise rejection technology. This feature is especially beneficial when the microphone is used on the move or handheld, as it minimizes unwanted noise caused by physical handling or wind impact. The microphone's robust construction is designed to withstand the rigors of field use, ensuring durability and longevity in various environmental conditions.

Another key aspect of the ENG 618 is its easy-to-use interface. The microphone is compatible with various audio equipment, including mixers and cameras, making it a versatile choice for professionals. The lightweight design contributes to ease of use, allowing users to maneuver it comfortably for extended periods without fatigue.

Moreover, the ENG 618's build quality reflects Electro-Voice's commitment to excellence. With a rugged metal housing, the microphone is designed to endure the tough conditions often encountered in electronic news gathering. In addition, it comes with an integrated pop filter that effectively reduces plosive sounds, further enhancing overall audio quality.

In summary, the Electro-Voice ENG 618 is an exceptional microphone tailored for ENG professionals. Its advanced technologies, user-friendly features, and robust design make it a reliable choice for anyone looking to achieve high-quality sound in demanding situations. Whether on the street, in a studio, or in the field, the ENG 618 stands out as a top-tier audio solution.