Fluke 54, 51, 52, 53 service manual Disassembly and Reassembly

Page 21

Thermometer

Disassembly and Reassembly

zb01f.eps

Figure 5. Battery Access

Disassembly and Reassembly

Disassembly and reassembly of the thermometer may be necessary to replace interior parts. Refer to Figure 6 when disassembling and reassembling the thermometer.

Disassembly

To disassemble the thermometer, follow these steps:

1.Remove the batteries (see “Changing the Batteries” section).

2.Remove the two screws located inside the battery compartment.

Caution

∙Before proceeding, make sure that you are grounded to prevent static discharge, which could damage the thermometer.

∙Inside the unit there are parts that can become contaminated by oils from the skin. These parts should not be directly handled. When lifting out the elastomeric connectors and the main switch pad, it is recommended that tweezers or sterile gloves be used.

3.Remove the two case bottom screws, located at the LCD-end of the unit and separate the bottom case from the top case.

4.Removing any of the interior components of the unit requires removing the Main PCA. To remove the Main PCA, place the top case face down and remove the two screws that attach the Main PCA to the top case. Gently lift the Main PCA out of the top case. The IR Lens, small Isothermal PCA, backlight, elastomeric connectors, and the LCD may all lift out attached to the Main PCA.

5.If the Isothermal PCA separates from the Main PCA, the Isothermal PCA, IR Lens, backlight, elastomeric connectors, and the LCD will still be in the top case. Lift them out of the top case after the Main PCA is removed.

13

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 51, 52, 53, 54 Series Limited Warranty & Limitation of Liability Table of Contents 51, 52, 53, 54 Series List of Tables 51, 52, 53, 54 Series List of Figures 51, 52, 53, 54 Series Introduction 51, 52, 53, 54 SeriesInternational Symbols Service CentersPrecautions and Safety Information International Electrical Symbols Used in this ManualThermometer Safety Information WWarningGeneral Specifications SpecificationsEnvironmental ElectricalPerformance Test and Calibration Required Test Equipment Performance TestsDisplay Test Keypad Test Wide Range Performance Test ProcedureIce Bath Test Verification of IR Communications Port Fluke 53 TemperatureCalibration Calibration and Offset AdjustmentMenu on the display changes to CAL A-d Reference Junction Calibration Basic Maintenance Cleaning the ThermometerChanging the Batteries Disassembly Disassembly and ReassemblyReinstalling the LCD Assembly ReassemblyNumber Replaceable Parts Fluke Part Qty Description Model Replaceable PartsQty Fluke Part Number NumberReplaceable Parts Description Model NumberExploded View Model 54 is Shown 51, 52, 53, 54 Series Index 51, 52, 53, 54 Series
Related manuals
Manual 12 pages 25.8 Kb

51, 52, 53, 54 specifications

The Fluke 51 is a high-precision digital thermometer designed for industrial and laboratory applications, offering accurate temperature measurements across a wide range of environments. With its robust build and advanced features, the Fluke 51 is a tool of choice for field technicians and engineers.

The Fluke 51 boasts an impressive temperature measurement range, typically from -200°C to 1372°C (-328°F to 2500°F), making it suitable for various applications, including HVAC, food processing, and scientific experimentation. One of its standout characteristics is its thermocouple compatibility, supporting multiple thermocouple types such as J, K, T, E, N, R, S, and B. This versatility allows users to select the appropriate sensor for their specific temperature requirements, enhancing measurement accuracy.

A key feature of the Fluke 51 is its fast response time, allowing users to obtain readings within seconds, which is essential for time-sensitive applications. The device is equipped with a large, easy-to-read LCD display that shows clear numerical values, ensuring users can read measurements from a distance or in difficult lighting conditions. Additionally, the display includes a hold function, enabling users to freeze the reading for easier observation.

In terms of data management, the Fluke 51 provides the option to store and recall temperature readings, facilitating efficient documentation and analysis. Its rugged design, resistant to dust and moisture, makes it suitable for use in demanding environments, ensuring durability and longevity.

The Fluke 51 is powered by standard AA batteries, giving it an extended operational lifespan. It also features a low battery indicator, helping users to manage power effectively and avoid unexpected downtime. The device is compact and lightweight, fitting comfortably in the hand and allowing for easy transport.

Another important aspect is its user-friendly interface, which includes intuitive buttons for quick navigation through settings and options. This design consideration enhances usability, allowing even novice users to operate the thermometer efficiently.

In summary, the Fluke 51 digital thermometer combines precision, durability, and ease of use, making it an essential tool in various professional settings. With its wide temperature range, thermocouple compatibility, fast response time, and robust design, the Fluke 51 is positioned as a reliable instrument for accurate temperature measurements wherever the task may take you.
Top Page Image Contents