DESCRIPTION
An adjustable
For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
Catalog #
Project
Comments
Prepared by
Type
Date
A.... Housing
Housing and junction box are aluminum, trim assembly is steel with powder coated finish. Fixture utilizes a removable trim sleeve to provide a 0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D... Electrical
Integral electronic metal halide ballasts are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Ballast enclosure includes a separated wiring compartment and two knockouts for conduit entry and features a perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and ballast enclosure) is removable from the housing for easy maintenance.
E.... Lamps
Four (4) PAR30 Metal Halide lamps mounted in adjustable double gimbal. Lamp holders are removable and may be regressed 1” for additional
edge lamp ring is secured with thread- less, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. Base sockets.
F.... Mounting
A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws.
G... Labels
cULus listed for
Ceiling
COMBOLIGHT®
Next Generation
Recessed
Four (4) Light PAR30 Metal Halide
Remodel Housing w/ 0.75” Trim Flange
Double
Gimbal
10.31”
45º x 45º Adjust
1.70”
7.19” |
16.44” |
Integral Electronic |
Metal Halide Ballasts |
9.25” |
Separate Wiring |
Compartment |
For use with 39W or 70W PAR30 Metal Halide lamps.
| 25.56” | |
7.95” |
| |
7.45” | 24.26” | |
Required | 23.59” | |
above | ||
| ||
ceiling | 22.76” | |
| 5.69” |
5.69”
| Thermal |
18” flexible conduit | Protector |
|
ORDERING INFORMATION
C4
R
E
T
|
|
|
|
|
|
|
|
| Configuration |
| Lamp Type / Wattage Label | ||||
| C4 = COMBOLIGHT |
| 039M30 = | 39 Watt PAR30 Metal Halide | |||
| Recessed Four (4) Light |
| 070M30 = | 70 Watt PAR30 Metal Halide | |||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| Housing |
| |||
|
|
| R = | Remodel |
| ||
|
|
|
|
|
|
|
|
Power Supply
Voltage
1 = 120V
2 = 277V
Power Supply
E = Electronic Metal Halide Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75” Trim Flange
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve Finish
W = White
B = Black
S = Industrial Silver
Specifications and Dimensions subject to change without notice.
rev 050108
www.cooperlighting.com | RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • |
|