Image is blurred / out of focus

Battery level is low - When the battery indicator does not show a fully charged battery, the voltage is too low for the ﬂash to work. Please change batteries.

Subject is out of focal range. Ensure that there is at least 1.5m ( 5ft ) between the camera lens and subject. Camera moved during the shot- Hold the camera steady while taking the picture. When ﬂash is on, hold the camera steady until ﬂash has ﬁred twice( The ﬁrst ﬂash is to reduce red-eye and to detect the brightness of the target.)

Computer does not recognize camera for Windows 98SE,

The camera driver has to be installed before picture download. In picture preview mode, ensure that USB mode is set to MSDC before connecting the camera to the computer. For Windows 2000/ ME /XP, the camera is recognized as a plug -&-playable, removable ﬂash disk without driver installation under MSDC mode.

It is recommended that you disconnect your digital camera from your computer after use.

Subject in recorded image is too dark

Insufﬁcient light for shooting Set the ﬂash On, or adjust the exposure compensation to a positive (+) setting.

Flickering on lcd screen or recorded image

Incorrect frequency setting Check the correct anti-ﬂicker frequency ( 50Hz or 60Hz ) under ﬂuorescent light setting.

Picture download problem

Flash disk does not display images recorded. The camera will load two removable ﬂash drives on your computer under MSDC mode. The ﬁrst drive is the external SD or MMC cartridge and the second drive is the recorded images saved in the built-in memory of the camera. In cases when the removable ﬂash drive names coincide with those already assigned by the computer