Cisco Systems 12 SP+ manual Access, choose Service Music On Hold, 42-14

Chapter 42 Cisco IP Phone Configuration

Configuring Cisco IP Phones

Table 42-1 Phone Configuration Settings (continued)

Field	Description
User Hold Audio	To specify the audio source played when a user initiates
Source	a hold action, click the drop-down arrow and choose an
	audio source from the list that displays.
	If you do not choose an audio source, Cisco CallManager
	uses the audio source defined in the device pool or the
	system default if the device pool does not specify an
	audio source ID.
	Note You define audio sources in the Music On
	Hold Audio Source Configuration pane. For
	access, choose Service > Music On Hold.
Network Hold Audio	To specify the audio source played when the network
Source	initiates a hold action, click the drop-down arrow and
	choose an audio source from the list that displays.
	If you do not choose an audio source, Cisco CallManager
	uses the audio source defined in the device pool or the
	system default if the device pool does not specify an
	audio source ID.
	Note You define audio sources in the Music On
	Hold Audio Source Configuration pane. For
	access, choose Service > Music On Hold.
Location	Choose the appropriate location for this Cisco IP phone.
	The location specifies the total bandwidth available for
	calls to and from this location. A location setting of
	None means that the locations feature does not keep track
	of the bandwidth consumed by this Cisco IP phone.

	Cisco CallManager Administration Guide
42-14	78-13310-01