IP PHONE USB
1.2 What is in the package?
When you receive your Atlantis Land IP PHONE, check to be sure that your package contains:
1.One USB phone
2.One Quick Installation Guide
3.One installation CD with softcopy manual
2 Quick Start
1.Plug the USB phone into the USB port of your PC.
2.Install the latest SkypeTM software if necessary
3.Install the Atlantis Land IP Phone software.
4.Launch Atlantis Land IP Phone software and SkypeTM
5.You are ready to make/answer SkypeTM calls over Internet.
2.1 Plug the phone into the USB port
The hardware installation is very simple. All you need to do is to connect the phone’s cable to the USB port on your PC. The red status LED on the phone will be on.
If you are connecting the phone for the first time, Windows will detect a new device and install drivers. There is no need for any special drivers, as the phone supports the Windows Human Interface Device and USB Audio Device 1.0 standards.
When installing the USB phone under Windows98SE/ME, you will need to confirm a few dialogs displayed by the New Hardware Installation Wizard.
2.2 Install the latest SkypeTM software
The USB phone must work with SkypeTM Rev. 1.0.0.100 and later. If your SkypeTM is older, please download the latest SkypeTM software at http://www.skype.com/download/redirect.
2.3 Install the Atlantis Land IP Phone software
The Atlantis Land IP Phone software is the special software designed for SkypeTM, which enables the USB phone to work with SkypeTM. The installation is very simple. Insert the installation CD, and execute the setup file IP_Phone_Setup.exe.
If the installation is successful, the Atlantis Land IP Phone software will be automatically launched when Windows restarts.
You can download the latest version of the software at
2 |