Cisco Systems OL-8131-01 manual Adding Phones with Cisco Unified CallManager Administration

Page 14

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified CallManager Database

You can use auto-registration to quickly enter phones into the

Cisco Unified CallManager database. You can then modify any settings, such as the directory numbers, from Cisco Unified CallManager. Additionally, you can move auto-registered phones to new locations and assign them to different device pools without affecting their directory numbers.

Auto-registration is enabled by default if Cisco Unified CallManager is operating in non-secured mode.

For information about enabling and configuring auto-registration, refer to Cisco Unified CallManager Administration Guide.

Related Topics

•Adding Phones with Cisco Unified CallManager Administration, page 2-14

•Adding Phones with BAT, page 2-15

Adding Phones with Cisco Unified CallManager Administration

You can add phones individually to the Cisco Unified CallManager database using Cisco Unified CallManager Administration web pages. To do so, you first need to obtain the MAC address for each phone. See the “Determining the MAC Address of a Cisco Unified IP Phone” section on page 2-12for instructions.

After you have collected MAC addresses, choose Device > Phone > Add New in Cisco Unified CallManager Administration to begin.

For additional instructions and conceptual information about Cisco Unified CallManager, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager System Guide.

Related Topics

•Determining the MAC Address of a Cisco Unified IP Phone, page 2-12

•Adding Phones with Auto-Registration, page 2-13

•Adding Phones with BAT, page 2-15

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones

 

 

2-14

 

OL-8131-01

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Preparing to Install Cisco Unified IP Phone on Your Network Configuring Telephony Features Related TopicRelated Topics Step Configuration Related Topics Understanding the Phone Startup ProcessStep Configuration Related Topics Step Configuration Related Topics Phone Understanding Phone Configuration Files and Profile Files Providing Power to the Cisco Unified IP Phone Power Outage Power Source DesignRedundancy Feature ProcedureCisco Unified IP Phone Method Reference Determining the MAC Address of a Cisco Unified IP PhoneAdding Phones to the Cisco Unified CallManager Database Adding Phones with Auto-Registration Requires MAC Method Address?Adding Phones with Cisco Unified CallManager Administration Creating a SIP Profile Adding Phones with BATClick Save Using Cisco Unified IP Phones with Different Protocols Converting a New Phone from Sccp to SIP Converting an In-Use Phone from Sccp to SIPConverting an In-Use Phone from SIP to Sccp Deploying a Phone in an Sccp and SIP EnvironmentOL-8131-01
Top Page Image Contents