Cisco Systems OL-8148-01 manual Converting an In-Use Phone from Sccp to SIP

Page 17

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Using Cisco Unified IP Phones with Different Protocols

See the “Configuring Startup Network Settings” section on page 3-14.

Step 3 Power cycle the phone.

Converting an In-Use Phone from SCCP to SIP

You can use the Bulk Administration Tool (BAT) to convert a phone that is in use in your network from SCCP to SIP. To access BAT from Cisco Unified CallManager Administration, choose Bulk Administration > Phones > Migrate Phones > SCCP to SIP. For detailed information, refer to Cisco Unified CallManager Bulk Administration Guide.

Converting an In-Use Phone from SIP to SCCP

To convert a phone that is in use in your network from SIP to SCCP, perform these steps. For more information, Cisco Unified CallManager Administration Guide.

Procedure

Step 1 In Cisco Unified CallManager Administration, delete the existing SIP phone from the Cisco Unified CallManager database.

Step 2 In Cisco Unified CallManager Administration, create the phone as an SCCP phone.

Step 3 Power cycle the phone.

Deploying a Phone in an SCCP and SIP Environment

To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the Cisco Unified CallManager Auto-Registration parameter is SCCP, perform these general steps:

1.Set the Cisco Unified CallManager auto_registration_protocol parameter to SCCP.

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones

 

OL-8148-01

2-17

 

Image 17
Contents A P T E R OL-8148-01 Related Topic VlanRelated Topics Providing Power to the PhonePower Type Guidelines Power GuidelinesPhone Power Consumption and Display Brightness Brightness Obtaining Additional Information about Power Power OutageUnderstanding Phone Configuration Files Process Step Description Related Topics Understanding the Phone Startup ProcessUnified CallManager Adding Phones to the Cisco Unified CallManager Database Requires MAC Method Address? Adding Phones with Auto-RegistrationAdding Phones with Auto-Registration and Taps Adding Phones with Cisco Unified CallManager Administration Adding Phones with BAT Converting a New Phone from Sccp to SIP Using Cisco Unified IP Phones with Different ProtocolsProcedure Deploying a Phone in an Sccp and SIP Environment Converting an In-Use Phone from Sccp to SIPConverting an In-Use Phone from SIP to Sccp Enterprise Parameters Determining the MAC Address of a Cisco Unified IP Phone