Cisco Systems OL-23092-01 manual Determining the MAC Address of a Cisco Unified IP Phone

Page 15

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Determining the MAC Address of a Cisco Unified IP Phone

Converting an In-Use Phone from One Protocol to the Other Protocol

For information about how to convert an in-use phone from one protocol to the other, see the Cisco Unified Communications Manager Administration Guide, Cisco Unified IP Phone Configuration, section Migration Existing Phone Configuration to a Different Phone.

Deploying a Phone in an SCCP and SIP Environment

To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the Cisco Unified Communications Manager Auto-Registration parameter is SCCP, perform these general steps:

1.Set the Cisco Unified Communications Manager auto_registration_protocol parameter to SCCP.

From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters.

2.Install the phones.

3.Change the Auto Registration Protocol enterprise parameter to SIP.

4.Auto-register the SIP phones.

Determining the MAC Address of a Cisco Unified IP Phone

Several of the procedures that are described in this manual require you to determine the MAC address of a Cisco Unified IP Phone. You can determine the MAC address for a phone in any of these ways:

•From the phone, choose Settings > Network Configuration and look at the MAC Address field.

•Look at the MAC label on the back of the phone.

•Display the web page for the phone and click the Device Information hyperlink.

For information about accessing the web page, see Accessing the Web Page for a Phone, page 8-2.

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

 

 

 

 

 

 

OL-23092-01

 

 

2-15

 

 

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents A P T E R Related Topic Telephony Features Available for the Phone,Related Topics Providing Power to the Phone Power GuidelinesPower Type Guidelines Phone Screen Phone Power Consumption and Display BrightnessMax. Power Phone Model Power Configuration Switch BrightnessObtaining Additional Information about Power Power OutageUnderstanding Phone Configuration Files OL-23092-01 Purpose Related Topics Understanding the Phone Startup ProcessSee Understanding Phone Configuration Files Security Guide, Security by DefaultRequires MAC Method Address? Adding Phones with Auto-RegistrationAdding Phones with Auto-Registration and Taps Procedure Adding Phones with BATUnified IP Phone, Using Cisco Unified IP Phones with Different Protocols See Configuring Startup Network Settings,Converting a New Phone from Sccp to SIP Deploying a Phone in an Sccp and SIP Environment Determining the MAC Address of a Cisco Unified IP PhoneOL-23092-01
Top Page Image Contents