Cisco Systems OL-22751-01 manual 78-4

Chapter 78 Common Phone Profile Configuration

Common Phone Profile Configuration Settings

Table 78-1 Common Phone Profile Configuration Settings (continued)

Field

Description

Phone Personalization Information

Phone Personalization The Phone Personalization setting allows you to enable a Cisco Unified IP Phone, so it works with Phone Designer, a Cisco Unified Communications widget that allows a phone user to customize the wallpaper and ring tones on the phone. From the Phone Personalization drop-down list box, choose one of the following options:

	• Disabled-The user cannot customize the Cisco Unified IP Phone by
	using Phone Designer.
	• Enabled-The user can use Phone Designer to customize the phone.
	• Default-The phone uses the configuration from the Phone
	Personalization enterprise parameter if you choose Default in both the
	Phone Configuration and Common Phone Profile Configuration
	windows. If you choose Default in the Common Phone Profile
	Configuration window but not in the Phone Configuration window, the
	phone uses the configuration that you specify in the Phone
	Configuration window.
	You must install and configure Phone Designer, so the phone user can
	customize the phone. Before you install and configure Phone Designer,
	identify which Cisco Unified IP Phone models work with Phone Designer,
	as described in the Phone Designer documentation. For more information on
	Phone Designer, see the Phone Designer documentation.
Always Use Prime Line	From the drop-down list box, choose one of the following options:
	• Off—When the phone is idle and receives a call on any line, the phone
	user answers the call from the line on which the call is received.
	• On—When the phone is idle (off hook) and receives a call on any line,
	the primary line gets chosen for the call. Calls on other lines continue to
	ring, and the phone user must select those other lines to answer these
	calls.
	• Default—Cisco Unified Communications Manager uses the
	configuration from the Always Use Prime Line service parameter, which
	supports the Cisco CallManager service.
Always Use Prime Line	From the drop-down list box, choose one of the following options:
for Voice Message	• On—If the phone is idle, the primary line on the phone becomes the
	active line for retrieving voice messages when the phone user presses the
	Messages button on the phone.
	• Off—If the phone is idle, pressing the Messages button on the phone
	automatically dials the voice-messaging system from the line that has a
	voice message. Cisco Unified Communications Manager always selects
	the first line that has a voice message. If no line has a voice message, the
	primary line gets used when the phone user presses the Messages button.
	• Default—Cisco Unified Communications Manager uses the
	configuration from the Always Use Prime Line for Voice Message
	service parameter, which supports the Cisco CallManager service.

	Cisco Unified Communications Manager Administration Guide
78-4	OL-22751-01