Using the Cisco Unified IP Phone 7975 with Cisco StadiumVision
Quick Start
TV Control
WELCOME
In your luxury suite, the Cisco Unified IP Phone 7975 can be used to control the TVs and to place calls. It has a touch screen, softkeys (which change depending on the screen contents and your site’s implementation), a navigation pad, and a phone keypad.
Use the touch screen to select the TVs or select a service.
Use the softkeys to:
•Navigate.
•Mute or unmute all TVs with single touch.
•Turn on and off all TVs with single touch.
The navigation pad is not used with Cisco StadiumVision Director TV control services.
Use the keypad to dial a phone number or enter a channel number.
Use the line buttons to select a phone line (if multiple), speed dial, or go to a defined URL.
CONTROLLING TVS
To control the TVs, touch TV/Volume.
SELECTING A DISPLAY
The TVs are typically identified by location. Touch the label of the TV you want to control or touch All.
SELECTING A CHANNEL
Touch desired channel, or touch the Page Up or Page Down arrows to see additional channels.
NOTE: The Back softkey will take you back to the previous operational screen. To scroll through multiple listing pages, use the Page Up or Down arrows.
As an alternative, you can touch Guide to view the channel guide on the associated TV, or touch Keypad and enter a desired channel number.
ADJ USTING THE VOLUME
To adjust the volume, touch the following buttons:
To increase the volume on the selected TV(s).
To decrease the volume on the selected TV(s).
To toggle between mute and unmute on the selected TV(s).
.