Cisco Systems OL-14587-01 manual Adding Phones with Auto-Registration and Taps

Page 13

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified Communications Manager Database

•Adding Phones with Cisco Unified Communications Manager Administration, page 2-14

•Adding Phones with BAT, page 2-14

Adding Phones with Auto-Registration and TAPS

You can add phones with auto-registration and TAPS, the Tool for Auto-Registered Phones Support, without first gathering MAC addresses from phones.

TAPS works with the Bulk Administration Tool (BAT) to update a batch of phones that were already added to the Cisco Unified Communications Manager database with dummy MAC addresses. Use TAPS to update MAC addresses and download pre-defined configurations for phones.

Note Cisco recommends that you use auto-registration and TAPS to add fewer than 100 phones to your network. To add more than 100 phones to your network, use the Bulk Administration Tool (BAT). See the “Adding Phones with BAT” section on page 2-14.

To implement TAPS, you or the end-user dial a TAPS directory number and follow voice prompts. When the process is complete, the phone will have downloaded its directory number and other settings, and the phone will be updated in

Cisco Unified Communications Manager Administration with the correct MAC address.

Auto-registration must be enabled in Cisco Unified Communications Manager Administration (System > Cisco Communications Manager) for TAPS to function.

Note When you configure the cluster for mixed mode through the Cisco CTL client, auto-registration is automatically disabled. When you configure the cluster for non-secure mode through the Cisco CTL client, auto-registration is automatically enabled.

Refer to Cisco Unified Communications Manager Bulk Administration Guide for detailed instructions about BAT and about TAPS.

 

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1

OL-14587-01

2-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents A P T E R OL-14587-01 Vlan Providing Power to the Phone Power Guidelines Power OutageObtaining Additional Information about Power Understanding Phone Configuration FilesPage Process Step and Purpose Related Topics Understanding the Phone Startup ProcessRefer to the Cisco Unified Communications See the Understanding Phone Method Address? Adding Phones with Auto-Registration Adding Phones with Auto-Registration and Taps MAC Address of a Cisco Unified IP Phone section on Adding Phones with BATDetermining the MAC Address of a Cisco Unified IP Phone Determining the MAC Address of a Cisco Unified IP Phone
Top Page Image Contents