Chapter B Setting Up and Using a Cisco Unified IP Phone as a Cisco IPICS
Configuring Cisco IPICS as a Phone Service for Cisco Unified Communications Manager Express
Step 3 (Optional) If you are configuring a service for a user who does not have to log in to use it, configure these parameters in the Service Parameter Information area:
•
•
•
Configuring Cisco IPICS as a Phone Service for Cisco Unified Communications Manager Express
To configure Cisco IPICS as an available service in Cisco Unified
Communications Manager Express, perform the following procedure:
Procedure
Step 1 Log in to the Cisco IOS router that runs Cisco Unified Communications Manager Express.
Step 2 Type this command to access the enable prompt:
Router> enable
Step 3 Enter the following commands to provision a router that is running Cisco Unified Communications Manager Express with the URL of the Cisco IPICS IP Phone service so that Cisco Unified IP Phones can function as Cisco IPICS PTT devices:
Router# configure terminal
Router(config)# telephony-service
<ipics server IP address>/ipics_server/servlet/IPPhoneManager
(replace ipics server IP address with the IP address of the Cisco IPICS server)
Step 4 Press
| Cisco IPICS Server Administration Guide |