Cisco Systems OL-11524-01 manual Network Statistics

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely

		Network Statistics
Table 8-2	Network Configuration Area Items (continued)
Item		Description
Voice VLAN Enabled		Indicates whether the phone allows a device attached
		to the PC port to access the Voice VLAN.
Auto Line Select		Indicates whether the phone shifts the call focus to
		incoming calls on all lines.
DSCP for Call Control		DSCP IP classification for call control signaling.
DSCP for		DSCP IP classification for any phone configuration
Configuration		transfer.
DSCP for Services		DSCP IP classification for phone-based services.
Security Mode		Displays the security mode that is set for the phone.
Web Access Enabled		Indicates whether web access is enabled (Yes) or
		disabled (No) for the phone.
Span to PC Port		Indicates whether the phone will forward packets
		transmitted and received on the network port to the
		access port.
PC VLAN		VLAN used to identify and remove 802.1P/Q tags
		from packets sent to the PC

Network Statistics

These network statistics areas on a phone’s web page provide information about network traffic on the phone:

•Ethernet Information area—Displays information about Ethernet traffic. Table 8-3describes the items in this area.

•Access area—Displays information about network traffic to and from the PC port on the phone. Table 8-4describes the items in this area.

•Network area—Displays information about network traffic to and from the network port on the phone. Table 8-4describes the items in this area.

To display a network statistics area, access the web page for the phone as described in the “Accessing the Web Page for a Phone” section on page 8-2, and then click the Ethernet Information, the Access, and or the Network hyperlink.

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones

OL-11524-01 8-11