Aastra Telecom 57I C53I manual Phones, Select SIP Settings

IP Phone Administrator Guide

Advanced Network Settings

IP Phone UI

Phones	Step	Action
	1	Press	on the phone to enter the Options List.
	2	Select SIP Settings.
IP
	3	Select Proxy Server (or Proxy IP for 57i/57i CT) and enter an IP address or fully qualified host name
		for the SIP proxy server.
the
	4	Select Proxy Port and enter a port for accessing the SIP proxy server.
	5	Select Registrar Server (or Registrar IP for 57i/57i CT) and enter an IP address or fully qualified
		host name for the SIP registrar server. A global value of 0.0.0.0 disables registration. However, the
Configuring		phone is still active and you can dial using username@ip address of the phone.
		If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then the
		register request is not sent, the "No Service" message does not display, and the message waiting
		indicator (MWI) does not come on.
	6	Select Registrar Port and enter a port number for accessing the SIP registrar server.
	7	Select Register and press Change to set Register to "Yes" (enable) or "No" (disable).
		This parameter enables/disables the IP phone to register on the network.
	8	Select User Name to enter the user name in the name field of the SIP URI for the IP phone, and for
		registering the phone at the registrar.
	9	Select Display Name to enter the name used in the display name field of the "From SIP" header
		field.
	10	Select Screen Name to enter the name that displays on the idle screen.
	11	Select Auth Name to enter the authorization name used in the username field of the Authorization
		header field of the SIP REGISTER request.
	12	Select Password to enter the password used to register the IP phone with the SIP proxy.
	13	Press Done to save the changes.
	14	Select Phone Status.
	15	Select Restart Phone and press Restart to reboot the phone for the VLAN features to take affect.

4-48 41-001160-00, Rev 01 Release 2.0