Cisco Systems 7960G manual Port 1 Network, Port 2 Access, and Port 3 Phone Statistics

Chapter 7 Monitoring the Cisco Unified IP Phone Remotely

Network Statistics

Table 7-3 Ethernet Area Items (continued)

Item	Description
Rx Frames	Total number of packets received by the phone
Rx CRC Errors	Total number of received packets dropped because of
	invalid CRC information
Rx Bad Preamble	Total number of received packets dropped because of
	bad Ethernet preamble information
Rx Runt	Total number of received packets dropped because of
	insufficient length
Rx Multicasts	Total number of multicast packets received by the
	phone
Rx Broadcasts	Total number of broadcast packets received by the
	phone
Rx Shorts	Total number of good packets received that are less
	than 64 bytes size
Rx Longs	Total number of good packets received that are
	greater than 1522 bytes in size

Port 1 (Network), Port 2 (Access), and Port 3 (Phone) Statistics

The following area on a phone’s web page provide information about network traffic to and from ports on the phone:

•Port 1 (Network)—Provides information about the 10/100 SW port

•Port 2 (Access)—Provides information about the 10/100 PC port

•Port 3 (Phone)—Provides information about network traffic to and from the phone

To display any of these areas, access the web page for the phone as described in the “Accessing the Web Page for a Phone” section on page 7-2, and then click the Port 1 (Network), the Port 2 (Access), or the Port 3 (Phone) hyperlink.

Table 7-4describes the items in the Port 1 (Network), Port 2 (Access), and Port 3 (Phone) areas.

	Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
7-12	OL-8555-02