8x8 BPG510 manual PPPoE, Authentication, Settings

Page 13

	BPG510 User Interface Guide
GATEWAY	is the IP address of your service provider's router.
DNS ADDRESS	Enter the IP address of the Domain Name System (DNS) server used by your
	service provider. Use the following format: XXX.XXX.XXX.X

PPPoE

The WAN PPPoE screen configures the BPG510 to support point-to-point protocol over Ethernet.

CAUTION

Saving the PPPoE Configuration reboots the BPG510.

Enable PPPoE

Select YES to activate the PPPoE protocol.

Authentication

Enter the USERNAME and PASSWORD you use to login to the PPPoE service.

Settings

Enter the SERVICE NAME and AC NAME required by your ISP. If you are not sure, leave this blank.

© 8x8 Inc., 2005

Page 13 of 27

Image 13

Contents Broadband Phone Gateway BPG510 Technical Users Guide Connecting Local Computers Front About your Broadband Phone Gateway BPG510Opening the BPG510s Configuration Utility BPG510 User Interface Guide Setting up with Dhcp Connecting to Your Broadband ModemSetting up with PPPoE Connecting a single computer Connecting Local ComputersConnecting a local network Setting up a DMZ Save DMZ Host Configuration Detailed Screen Reference Network SettingsWAN Menu WAN StatusObtain WAN configuration dynamically WAN ConfigurationSpecify fixed WAN configuration Settings AuthenticationPPPoE LAN Menu LAN ConfigurationMAC Cloning Server Configuration Dhcp Client Table BPG510 User Interface Guide 8x8 Inc Static Routing Router Configuration Dynamic RoutingGateway IP Port ForwardingReserved Ports Filtering ConfigurationPort Forwarding to LAN Filtered LAN IP Addresses DMZ Host ConfigurationNew password Set Security PasswordConfirm new password System MenuCall Log Adjust clock for daylight savingsCountry NTP ServerUDIO/RTP Error LogEnable Simple Key Setting Handset ConfigurationComplex Key Settings Advanced feature commands Upgrade Firmware Menu Reset and execute Main Application Reset MenuReset and Execute Downloader Application