1.Preliminary planning: Determine the number of MultiVOIP gateways to be used for the paging network. Assign a unique IP address and identifying number to each MultiVOIP. It is helpful to write this down like below:
MultiVOIP | Identifying | IP Address | Local Voice | Destination | Destination |
Name | Number |
| Channel | MultiVOIP | MultiVOIP Voice |
|
|
|
| Number | Channel |
Corporate | 1 | 192.168.25.20 | 1 | 2 | 1 |
|
|
| 2 | 3 | 1 |
Branch A | 2 | 192.168.25.21 | 1 | 1 | 1 |
Branch B | 3 | 192.168.25.22 | 1 | 1 | 2 |
2.In the Configuration / IP screen of the MultiVOIP Configuration software, configure each MultiVOIP with a unique IP address. Also configure the mask and gateway address. If all MultiVOIPs are located in the same subnet, you can leave the gateway address field blank. Click Ok when finished.
Corporate
4