AT&T System 25 manual Data Dial Code DDC, Personal Dial Code PDC, Additional Information

Page 9

Data Dial Code (DDC)

When your System 25 was installed, Data Dial Codes (DDCs) were assigned to data terminals. If you have a data terminal associated with your System 25, you will receive separate information regarding its use.

Personal Dial Code (PDC)

Personal Dial Codes (PDCs) were assigned to telephones. In most cases, your PDC is your extension number. If a telephone is shared by two or more people, each person may have been assigned his or her own “floating” extension number (FPDC).

Additional Information

See your System Administrator if you have any questions or would like additional information about your System 25 features.

6

Image 9
Contents AT&T System 25 Cordless Telephone To Order Copies of this Document Refer to Document Number Contents Introduction Base Unit Controls Cordless Telephone ControlsHandset Controls Ringing Tones LightsHandset Tones Data Dial Code DDC Personal Dial Code PDCAdditional Information System 25 Features System 25 Cordless Telephone Features First to use Programming System 25 Features ConsiderationsOrder of Appearance of Buttons Press On/Off Procedures for Programming Features
Related manuals
Manual 85 pages 47.52 Kb