9357_book/wc_1ATT 7/6/01 4:10 PM Page 5
INSTALLATION
Wall Installation
1Connect the telephone line cord.
2Connect the power cord.
CL flashes in the Message Window.
Use only the power cord supplied with this product. If you need a replacement, call 1 800
3 Mount the base on the wall.
a)Align holes on base with
mounting studs on wall jack.
b) Place power cord as shown.
c) Pull base down on mounting studs until it locks into place.
4 Follow Steps 3–5 in “Table/Desk Installation.”
5