AT&T 9210 user manual Headset Jack, Handset Volume, Battery Save

T E L E P H O N E O P E R A T I O N

Headset Jack

You can use this telephone hands-free when you install a 2.5 mm headset (SKU 24099), purchased separately.

Handset Volume	Plug the headset into the jack
Adjust volume of what you hear	under the small rubber flap. Do
	not force the connection, but
through the handset.
	make sure the plug fits securely.

Make or Answer a Call						End a Call
Lift handset from base				Place handset in base
— OR —							— OR —
Press P.						Press O.
					Exit programming.
Flash/Call Waiting
						Cancel a page.
Access special telephone							Redial
company subscriber services.
Temporary Tone Dialing		Press P, then press Rto call
		the last number dialed (up to 24 digits).
Press to change from dial pulse
to touch tone dialing during a				Change Channel
call. This is useful if you have
			Switch to a clearer channel.
dial pulse (rotary) service and
need to send touch tone signals
for access to telephone banking			Handset Ringer Style/
or long-distance services.
					Battery Save
1	Dial the number.
		Select from four different handset
2 Press *. Buttons pressed
			ringer styles, or turn the ringer
	after this send touch tone
			off and extend battery life.
	signals.
		1 Make sure the handset is off.
3	After you hang up, the
				2 Press G, #.
	phone automatically returns
		3 Press 1, 2, 3or 4to select
	to dial pulse (rotary) service.
			your ringer style (you will
			hear a sample), or press 5
				to turn the ringer off.
					4 Press M.
			When the ringer is off, select a
			ringer style to turn it on again.

3