AT&T E5600, E5603B user manual Case of difficulty, Telephone does not work at all

Page 29

91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 27

Appendix

In case of difficulty

If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call 1-800-222–3111.

Telephone does not work at all

•Make sure battery is installed and charged correctly (see page 8).

•Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.

•Make sure the telephone line cord is plugged firmly into the base unit and the modular jack.

•If you have dial-pulse telephone service, make sure the dial mode is set to Pulse (see page 16).

•If these suggestions do not work, unplug the base, remove and re- insert the battery, then place the handset in the base to re-initialize.

Phone does not ring

•Make sure the ringer is on (see page 15).

•Make sure the telephone line cord and AC adapter are plugged in properly (see page 7).

•Move the handset closer to the base.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

If you hear noise or interference during a call

•You may be out of range. Move closer to the base.

•Appliances plugged into the same circuit as the base can cause interference. Try moving the appliance or base to another outlet.

•The layout of your home or office might be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

•Disconnect the base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in your wiring or local service. Call your local telephone service company.

•Do you have DSL service? If so, you need to have a DSL filter installed at every phone jack that has a phone connected to it. Contact your DSL service provider for filter information.

Handset displays "Charging…." ,

and buttons do not respond

•The base unit may have lost power. Make sure the base unit is plugged into the power source.

•Place the handset in the base unit (or Charge Cradle of E560-1), wait 4 minutes. The handset will return to "Searching" mode and link with the base unit.

•If this does not happen, remove the handset battery for at least 3 seconds, then replace it. The handset will return to "Searching" mode and link with the base unit.

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents GHz Cordless Telephone E5600/E5603B Add new handsets to make your phone more versatile see SeeGHz Cordless Telephone E5600/E5603B Table of contentsHandset Quick reference guideTelephone Base Parts checklist for E5600 Parts checklist for E5603B Telephone operating range Before you beginAbout Caller Identification Electrical outlet Telephone base installationLOW Battery Battery installation & chargingWall mounting Install the line cord as Shown in the diagramBelt clip & optional headset Install belt clip as shown below if desiredElapsed time Options while on calls Handling incoming calls Intercom callsIntercom calls Call transfer Call transferRinger volume Handset settingsRinger tone Key toneDial Type Clear Message Waiting IndicatorLanguage Memory capacity Timeouts and error messagesTo create a new phone book entry New phone book entriesTo enter a name Storing the entryTo browse through the phone book Phone book searchTo search by name To call a displayed numberTo dial a number To dial, delete or change entriesTo delete an entry To change a listingAbout names How Caller ID worksTo review your call log To review your call logTo return a call ExampleIndicator lights Screen icons, indicator lights & tonesHandset screen icons & alert tones Screen iconsTo add a new handset Adding new handsetsRemove all handsets from the charge cradles and base Replacing a handsetTo de-register all handsets To re-register a handset to a new base unit Re-Registering a handsetTo re-register a handset Telephone does not work at all Case of difficultyReplacement Battery Technical specificationsIndex
Top Page Image Contents