Installation and setup
After battery installation, the battery may have enough charge to allow some calls. For best performance, place the handsets in the telephone base or the charger and allow to charge for 16 hours before use.
You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about eight hours, and the standby time is approximately five days. Actual battery life depends on usage conditions and age of battery.
1.Plug the battery securely into the plug inside the handset battery compart- ment, matching the color- coded label.
2.Place the battery and wires neatly inside the compartment.
3.Slide battery compartment cover towards the center until it clicks into place.
4.The battery may have enough charge to allow for some calls. For best performance, place hand- set in telephone base or
charger to charge for at least 16 hours before first use.
TONE |
|
MUTE | REDIAL |
DELETE | PAUSE |
To replace the battery, press in and push outward on the tab to open the bat- tery compartment cover. Lift out the old battery and disconnect it from the compartment. Follow the instructions on this page to install and charge the new battery.
Caution: Use only the supplied rechargeable battery or replacement battery (model 27910, part number