Battery installation & charging
After installation, place the handset in the charger and allow batteries to charge for 12 hours before use. You can keep batteries charged by returning the handset to the charger after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
1
LOW BATTERY
Press coin into slot on base of handset to release latch, then remove battery cover.
To replace battery cover
Insert top tab first.
Caution: Use only the supplied NiMH battery
REDIAL 2:10 PM CID LOG
Low battery indicator
Return handset to charger to recharge when this symbol flashes. (Handset will beep when battery is low.)
Insert supplied batteries.
Plug power cord into jack on underside of charger, then plug transformer into electrical outlet.
Press down to click in place.
Place handset in charger to charge for 12 hours before first use.
Light remains on while batteries are charging.
2