Battery & charger installation

91-000303-050-000_EP590-2Englishmanual_Sep01,2005.qxd 2/13/1950 7:21 PM Page 2

Installation of Battery pack in Handset

Follow the step below:

1.Remove the battery compartment cover by pressing on the indentation and sliding downward. Place the new battery pack in the handset with the positive and negative poles aligned in the battery compartment.

2.Replace the battery cover by sliding it upwards.

3.Place the handset in its charger, and allow it to charge for at least 10-12 hours. After ini- tial charge, a maintenance charge of 8 hours should be sufficient.

Insert supplied battery.

Charging of the Handset battery Pack

Caution: Use only supplied recharge- able battery (model 102) or AT&T replacement battery model 103.

The cordless handset is powered by a rechargeable battery pack. It charges automatically whenever the handset is in its charger. You should charge the battery pack for at least 10-12 hours when you first receive your phone. Average talk time on a fully charged battery is about 8 hours depending on environmental conditions. The battery charge will last for about 4.5 days if you don't use the phone.

You will know the battery pack needs charging when :

•The low battery message is displayed.

•The handset seems completely dead, the LCD is completely clear and does not respond when you press the keys.

Plug power cord into jack on underside of charger, then plug transformer into electrical outlet.

LOW

BATTERY

Place handset in charger for 12 hours before first use.