AT&T 6200 Batteries, Charging the Handset Battery Pack, Replacing the Handset Battery Pack

Page 7

BATTERIES

Charging the Handset Battery Pack

This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. A fully charged battery provides an average talk time of about six hours.

The battery pack needs charging when:

•A new battery is installed in the handset.

•The phone beeps twice when you press P.

•The phone light flashes slowly.

Place the handset in the base so the CHARGING light turns on. The battery pack is typically fully charged in eight hours.

You can keep the battery fully charged by returning the handset to the base after each use.

If you repeatedly get a low battery indicator, even after eight hours of charging, the battery should be replaced.

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least 24 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Draft 7/10/01 MHz Cordless Telephone Before You Install InstallationTable/Desk Installation Wall Installation Telephone Operation Headset Jack Ringer Off/Battery SaveMaking a Net2Phone Call Handset Ringer StyleTelephone Memory Replacing the Handset Battery Pack Charging the Handset Battery PackBatteries If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callIf you hear other calls while using your phone Case of Difficulty

6200 specifications

The AT&T 6200 is a remarkable device that caters to various communication needs, seamlessly integrating cutting-edge technology with user-friendly features. Primarily designed for business and individual users, it stands out for its robust performance, exceptional battery life, and versatility.

One of the main features of the AT&T 6200 is its expansive connectivity options. The device supports 4G LTE, ensuring fast data speeds, which is essential for on-the-go users who require reliable internet access for browsing, streaming, or video conferencing. Additionally, it is equipped with Wi-Fi calling, enabling users to make calls over a wireless network, enhancing connectivity even in areas with poor cellular coverage.

The AT&T 6200 is powered by a capable processor that allows for smooth multitasking, meaning users can efficiently run multiple applications without experiencing lag. Its user interface is designed to be intuitive, featuring a clean layout that makes navigation seamless, even for those who may not be tech-savvy. This focus on ease of use is further emphasized by its customizable home screen, which allows users to prioritize their most frequently used apps.

Another significant characteristic of the AT&T 6200 is its impressive battery life. The device is built with an energy-efficient battery that can last through a full day of heavy use, reducing the need for constant charging. Additionally, it includes fast charging capabilities, allowing users to quickly recharge the device when needed.

In terms of security, the AT&T 6200 incorporates advanced features such as biometric authentication. Users can unlock their device using fingerprint recognition, adding an extra layer of protection for sensitive data and personal information.

The AT&T 6200 also shines in its expansion capabilities. With a microSD slot, users can increase their storage capacity, accommodating more applications, media, and files. This flexibility is especially valuable for users who prefer to keep an extensive library of content available at their fingertips.

Overall, the AT&T 6200 represents a balanced combination of performance, durability, and innovation, making it an appealing choice for anyone in need of a reliable communication device. Its thoughtful features cater to both personal and professional applications, ensuring users stay connected and productive, no matter where they are. As communication technology continues to evolve, the AT&T 6200 remains a relevant and dynamic option in a crowded market.
Top Page Image Contents