Feature Setup

Set the time and date displayed on handset screen

If you subscribe to Caller ID service, the date and time will be set automatically with the first incoming call.

If you do not have Caller ID service, you can set the date and time manually.

•Press , then press until is

displayed. Press .

•The month is flashing. Use or to select the

current month. Press .

•The day is flashing. Use or to select the

correct day. Press .

•The hour is flashing. Use or to select the

current hour. Press .

•The minute is flashing. Use or to select the

correct minute. Press .

• or is flashing. Use or to choose

between and . Press .

Set the phone for tone or pulse dialing (base only)

•Press on base.

•Press or until and the current

setting is displayed,then press .

•Use or to select the correct setting.

•Press to save the setting.

Set the language

•Press on the base or on the handset.

•Press or until is displayed.

•Press , the current setting is flashing.

•Use or to select , or .

•Press to save the setting.

AT&T and the Globe Design are

trademarks of AT&T Corp., licensed to

Advanced American Telephones.

Printed in China. Issue 1AT&T 05/03

Answering System

Press to turn the system on or off. When the system is on, you will hear “Machine on” and the ON/OFF light will be lit.

If you turn the system on at the first time, it works using the default setting and pre-recorded outgoing announcements. For details on recording your own outgoing announcements and changing system settings, see “ANSWERING SYSTEM OPERATION AT THE BASE” start- ing on page 24 of your User’s Manual.

Set the Clock

1Make sure the answering system is on.

2Press .The system announces the clock setting then announces:“To change clock, press .”

3Press .

4Press until the system announces the

correct day, then press .

5Press until the system announces the

correct hour, then press .

6Press until the system announces the

correct minutes,then press .

7Press until the system announces the

correct years,then press . The system announces the current clock setting.

¥NOTE:You can choose to set the day and time manually, or you can allow it to be set automatically with incoming Caller ID Information.

¥NOTE: Press and hold to advance the minute or the year by 10.

¥NOTE: The selection of the year is from 2000 to 2039.

Record Your Announcement

¥NOTE: For complete details about recording announcements, see “Record Your Announcement” in the ANSWERING SYSTEM OPERATION section of your User’s Manual.

1With the system set for the desired answer mode

(normal or Announce Only) press until you hear “Change announcement.”

2Press . After you hear “Now recording” followed by a beep, speak toward the

base to record an nnouncement up to 90 seconds long.

3Press any MAILBOX/STOP button to stop recording. The system plays back your recorded message.