Uniden D3280 manual Audio issues Possible solutions, Multi-handset problems Possible solutions

The phone keeps ringing when I answer on an extension.

You may have to change the line mode. Contact Customer Service for instructions.

Audio issues	Possible solutions
Callers sound		Move the handset closer to the base.
		Keep the handset’s battery fully charged.
weak or soft.
		Increase the earpiece volume.

Check for interference from appliances (microwave ovens, TVs, etc.) or

There’s a lot of		wireless devices (baby monitors, WiFi equipment, etc.). Move the handset
noise or static on		or base away from the interference source.
		If you use a telecoil hearing aid, turn on T-coil mode (see p. 8).
the line
		If you have any service that uses the phone line, add a DSL or telephone
		line filter (see p. 23).
Caller ID problems			Possible solutions
No handsets display Caller				Let calls ring twice before answering.
ID information.				Make sure your Caller ID service is active.
Caller ID displays briefly				You may have to change the line mode. Contact Customer
and then clears.				Service for instructions.
Multi-handset problems							Possible solutions
I can’t transfer calls.							 Reset the handset (see p. 23).
Two handsets can’t talk to a caller.							 See if any handset is in Privacy Mode.
A handset says Unavailable.								Move the handset closer to the base.
								See if any handset is in Privacy Mode.
I can’t register a new handset.								Reset the handset (see p. 23).
								See if you have 12 registered handsets.
Answering system problems					Possible solutions
The answering system does not						Make sure the answering system is on.
work.						Make sure the base is plugged in.
The system won't record						See if Record Time is set to Announce Only.
messages.						Delete messages (memory may be full).
A handset can't access the						See if another handset is using the system.
answering system.						Make sure the phone is in standby.
My outgoing message is gone.						If there was a power failure, re-record your personal
						outgoing message.
I can’t hear the base speaker.						Make sure call screening is turned on.
						Change the base speaker volume.
Messages are incomplete.						Increase the Record Time.
						Delete messages (memory may be full).
The system keeps recording when						You may have to change the line mode. Contact
I answer on an extension.						Customer Service for instructions.

22 - English