4-4-9. NAND capacity check (NCAPCHK)
Capacity of NAND flash memory, present bad block, maximum bad block, and vender ID are displayed.
Checking method:
1.Enter the test mode.
2.Press the [>]/[.] key to select the “OTHER”, and press the [u] key to enter the minor item.
3.Press the [>]/[.] key to select the “NCAPCHK”.
4.Press the [u] key, capacity of NAND flash memory, present bad block, maximum bad block, and vender ID are displayed.
Screen display
OTHER NCAPCHK
X GB
BAD BLOCK
CUR (####)/MAX (@@@@)
VENDOR ($$$$)
X: Capacity of NAND flash memory
@@@@ : Number of present bad block
(It makes an error the acquisition of the number of bad blocks at
#### : Number of maximum bud block
(It makes an error the acquisition of the vender ID at
$$$$ : Vender ID of NAND flash memory 0x98/0xec (TOSHIBA/SAMSUNG)
(It makes an error the acquisition of the vender ID at
5. Press the [HOME] key, return to minor item selection screen.
Screen display
MPTAPP (X.XX.XX)
NWZ-X1050/X1051/X1060/X1061
4-5-2. Clear stereo setting (No cable) (WOCABLE)
This mode is according to an original sound playback, for adjust- ment to right and left sound.
Note: Not used for the servicing.
4-6. DAC
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO
VIDEO
OTHER
CLESTE
DAC
WIFI
FM
NC
SHUTDOWN
EXITTEST
4-6-1. BASS-Gain/Fc setting (B-GAIN)
This mode is adjustment for the sound of BASS when playback.
Note: Not used for the servicing.
4-6-2. TREBLE-Gain/Fc setting (T-GAIN)
This mode is adjustment for the sound of TREBLE when playback.
Note: Not used for the servicing.
4-7. Wi-Fi (WIFI)
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO
VIDEO
OTHER
CLESTE
DAC
POWER
AUDIO
VIDEO
OTHER
CLESTE DAC WIFI FM NC
SHUTDOWN EXITTEST
WCABLE WOCABLE
1SEG
WIFI TX(CW)
FM TX(MOD)
NC RX
SHUTDOWN RSSI EXITTEST POWER
APINFO
APCONN
APSCAN
4-5-1. Clear stereo setting (With cable) (WCABLE)
This mode is according to an original sound playback, for adjust- ment to right and left sound.
Note: Not used for the servicing.
23