Sony BM10 Pairing and connecting, To manually pair the music receiver with your phone

Pairing and connecting

Before you can use your music receiver to play music through a stereo system, you need to first pair the music receiver with your phone. You can pair the devices manually, or you can use NFC. Once paired, the music receiver automatically establishes a connection to your phone.

The internal memory of your music receiver can save and remember up to eight pairings with other phones at any given time.

To manually pair the music receiver with your phone

1Make sure your phone has the Bluetooth® function turned on.

2Music Receiver: If you are pairing the music receiver with a phone for the first time, the music receiver enters pairing mode automatically. If not, press and hold the Pair/Connect button until the notification light flashes blue.

3Phone: Scan for Bluetooth® devices, then select BM10 in the available devices list.

4Follow the pairing instructions that appear on your phone. If a PIN code is required, enter "0000".

To pair the music receiver with a phone using NFC

1Make sure that the phone has the NFC function turned on and that the screen is active and unlocked.

2Place the phone over the music receiver so that the NFC detection area of each device touches the other.

5

This is an Internet version of this publication. © Print only for private use.