Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press S until y displays and the code number flashes.
2. Press [ or ] to select the code (see page 42).
3. Press and hold Push to Talk to exit programming mode, or press
Sto continue programming.
Programming the Available Channels (CLS1410 only)
If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press S until = displays and the channel number flashes.
2. Press [ or ] to select the number of channels you want available.
3.Press and hold Push to Talk to exit programming mode, or press S to continue programming.
Note: The radio retains settings for channels made unavailable.
Programming Mode
29