How to…
Answer a call
Press the MFB on your headset to answer a call.
End a call
Press the MFB to end an active call.
Make a call
When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, press on the Hisense HB200M’s MFB to transfer the call to the headset.
Reject a call*
Press the MFB for approximately 2 seconds when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialing*
Press the MFB once. Wait for the beep and then announce the name you wish to call
For best results, record the
Redial last number*
Press the MFB twice when the headset is on and not in use.
Adjust sound and volume
Volume adjustment can be done by the volume control in your mobile phone, we canceled the volume button on the headset In order to reduce the size of the HB200M.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
Press the MFB twice to put the active call on hold and answer the waiting call.
Press the MFB twice to switch between the two calls. Press the MFB to end the active conversation.
Functions marked with * are dependent on your phone supporting these features.
Check your phone’s user manual for further information.
12 | 13 |