6.Your phone will then ask if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 6.
Note: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power off automatically. Please repeat steps above to pair the speakerphone and mobile phone again.
How to…
Answer a call
Press the MFB on your speaker to answer a call.
End a call
Press the MFB to end an active call.
Make a call
When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your speaker. If your phone does not allow this feature, press on the Hisense HB600’s MFB to transfer the call to the speaker.
Reject a call*
Press the MFB for approximately 2 seconds when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialing*
Press the MFB once. Wait for the beep and then an- nounce the name you wish to call.
For best results, record the
Redial last number*
Press the MFB twice when the speaker is turned on and not use (StandBy mode).
Adjust sound and volume
During a call, repeatedly press the Volume (+) or Volume
Call waiting and Placing a Call on Hold*
This lets you put a call on hold during a conversation and answer a waiting call.
Press the MFB twice to put the active call on hold and answer the waiting call.
Press the MFB twice to switch between the two calls. Tap the MFB to end the active conversation.
Reject Call Waiting
During a conversation, Press the MFB for 2 seconds in order to reject the call waiting.
Mute Function
During a conversation, press the mute button to mute the microphone.
To reactivate the microphone, short press the mute button.
10 | 11 |