Jabra BT8040 user manual Wear it how you like it, Pair it with your phone, Manual pairing

Pair it with your phone

Before you use your Jabra BT8040, you will need to pair it with your mobile phone.

1.Your headset will automatically go into pairing mode when you turn it on the first time.

2.Set your Bluetooth phone to ‘discover’ the Jabra BT8040.

Follow your phone’s instructions. This usually involves going to a ‘setup’, ‘connect’, or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*

3. Your phone will find the Jabra BT8040.

Your phone then asks you if you want to pair with it. Accept this by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when the pairing is complete.

In the case of an unsuccessful pairing, repeat steps 1 to 3.

Manual pairing

You can manually put your Jabra BT8040 into pairing mode, if you want to pair with a second phone or Bluetooth device:

1.Ensure that the headset is off.

2.Press and hold the answer/end button for approx. 5 sec. until the light turns solid Blue.

3.Set your Bluetooth phone to discover your headset as described above.

Wear it how you like it

The Jabra BT8040 is ready to be worn. The ear gels can be used for both left and right wearing. The BT8040 comes with a medium sized ear-gel, but it can be replaced by a small or large one. You can also twist the ear gel slightly to optimize the fit and comfort.

english