Instruction | Duration of press |
|
|
Tap |
|
|
|
Press | Approx: 1 second |
|
|
Press and hold | Approx: 5 seconds |
|
|
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before you start using it. Use the AC power supply to charge from a power socket. When the battery indicator has a solid red light, your headset is charging. When the headset is fully charged the
.
Use only the charger provided in the box - do not use chargers from any other devices as this may damage your headset.
Please note: T
if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.
TURNING YOUR HEADSET ON AND OFF
Slide the switch to the 'I' position to power on, and to the 'O' position to power o.
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called ‘pairing’. By following a few simple steps, a phone can be paired with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra BT 9
headset will automatically start up on pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the Bluetooth status indication on the StatusDisplay™ is
.
JABRA BT2090 | 4 |