Jabra 250 Pair to your Bluetooth phone, Basic Operations, Enter passkey or PIN4 = 0000 4 zeros

English

4 “Pair” to your Bluetooth phone

Pairing3 will create a unique and encrypted wireless link between two Bluetooth- enabled devices such as your Bluetooth phone and JABRA FreeSpeak 250.

1. Ensure the headset is off (see Turning headset on/off section).

2. Press and hold until you see a solid blue light (approximately 8 seconds), then release* (see Fig. 2).

3.	Set your Bluetooth phone to “discover”
	the headset by following your phone’s
	instruction guide. Typically, the steps	Fig. 2
	involve going to a “setup”,“connect”or
	“Bluetooth” menu on your phone and
	then selecting the option to “discover” a
	Bluetooth device.
4.	Your phone will find the “JABRA 250”
	headset and ask if you want to pair with
	it. Confirm this by pressing “yes” or “ok”.
5.	Enter passkey or PIN4 = 0000 (4 zeros),
	then press “yes” or “ok”.	Fig. 3

IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly before going back to flashing every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to reattempt pairing (see steps 3–5 above).

*If you have a Bluetooth phone that supports the hands-freeBluetooth profile, see Enhanced features section for alternative pairing instructions. Phone- specific pairing instructions can be found online at www.jabra.com/fscs

BASIC OPERATIONS
5	Turning headset on/off
		What you do			What you hear			What you see
Turning		Press and hold		for 3 to 5	Ascending			The blue indicator
headset on
		seconds until you see a			(low-to-high)			light will flash while
		burst of flashes on the blue			tones			the power is on (see
		indicator light, then release						Status indicators
								table below)
Turning		Press and hold		for 3 to 5	Descending			The blue indicator
headset off		seconds until you see a			(high-to-low)			light will stop
		burst of flashes on the blue			tones			flashing
		indicator light, then release
Status indicators
What you see			What you hear			Status
Flashes every			Quick series of 2 tones –			Active Mode5
second			low to high pitch (when			•	Call in progress
			active mode starts)			•	Up to 8 hours of talk-time*
Flashes every			Quick series of 2 tones –			Standby Mode6
3 seconds			high to low pitch (when			•	Waiting for call
			standby mode starts)			•	Up to 240 hours of
							standby time*
3 flashes every			3 beeps every 30 seconds			Low Battery (in active mode)
second						•	3 – 5 minutes of talk time left
3 flashes every 3			3 beeps every 5 minutes			Low Battery (in standby mode)
seconds						•	3 – 5 minutes of talk time left

*Depending on phone type and usage.

IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when turning the headset on or else it may go into pairing mode, and the blue indicator light will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat process for turning the headset on.

English

6 7